click here for more information
masterpack: 1pc
|
|
COM3
Public Adress Amplifier
The COM3 is a public adress amplifier with a power of up to 60W. It contains 2 unbalanced stereo line level inputs, which are switchable between Line and Mic level and one Microphone level input. This way, a maximum of 3 balanced microphones can be connected.
The output level is selectable between high impedance 100V, 70V and 25V outputs, or 4 Ohm impedance. It is equipped with an advanced protection circuit, which shields against DC short circuit, overheating, overload and limits the signal when necessary.
All contol functions such as the individual channel volume controls, a 2 band tone control, the master volume control and indicators like a VU led bar and clipping leds are located at the front of the amplifier.
Optional brackets are available for mounting the COM3 in a 19" rack setup
.
|
| |
click here for more information
masterpack: 1pc
|
|
ATU44
Universal Input Adaptor
The ATU44 is a universal input adapter which can be used for a wide
varity of connections and extensions.
It can be used for coverting any loudspeaker level into a balanced or
unbalanced Line level signal. It has inputs for 100V, 70V, 50V, 20V and
standard 8 Ohm low impedance speaker signals.
A second possibility is converting an unbalanced line level signal into
a balanced one, and vice versa.
The switch on the frontpanel allows you to select between converting
a speakersignal into a line level signal, or the conversion of line level
signals.
The in- and outputs are completely galvanic isolated by means of an
audio isolation transformer. This makes the ATU44 the perfect solution
for solving hum and buzz problems caused by ground loops.
|
| |
click here for more information
masterpack: 1pc
|
|
ALI20
Audio Line Isolator
The ALI20 is an Audio Line Isolators, designed to isolate audio devices
from each other, in most cases they are used to avoid hum, caused by
ground loops in audio systems.
They offer a complete passive solution for the isolation
of a stereo balanced audio signal. It features dual XLR
in- and output connectors and a ground lift switch.
The in- and output phase are matching.
The ALI20 is built with an audio transformer
that has a turns ratio of 1:1 and an impedance of 600
Ohm.
The ALI20 contains
a shielded transformer which complies with the requirements of most
standard applications,
|
click here for more information
masterpack: 1pc
|
|
ALI/25
Audio Line Isolator
Like the ALI/20, the ALI/25 is an Audio Line Isolators usually used to avoid hum caused by
ground loops.
This passive solution for the isolation
of a stereo balanced audio signal has the same dual XLR in-and output connectors as the ALI/20.
The impedance and turns ratio are also the same.
The difference is the shielding of the transformer. The ALI20 contains
a standard shielded transformer, while the ALI25 contains a MU-metal shielded
transformer which can be used when regular shielding becomes
inadequate. This ensures the best results in even the highest EMI
polluted environments.
 |
|
 |
| ALI units are equipped with either the standard TR106 (shown left) transformers or the MU-metal shielded TR266 (right). With AUDAC, you choose the appropriate level of EMI shielding |
|
click here for more information
masterpack: 10pc
|
|
CMX720
Headset microphone - NEW CONNECTOR
The CMX720 headset microphone is designed for vocal and speech applications. The quality electronics ensure a high-fidelity sound reproduction, true to the user’s voice and intonation.
Not only is it barely noticable to an audiance, but it is also light and comfortable for the wearer. The skin colour version is now available with a stereo mini-jack connector compatible with sennheiser receivers (CMX720SJ).
|
Contact us for more information: info@audac.eu |
